10-Micron Standard Carbon Block Filter (10″)

$24.99

This 10-micron activated carbon block cartridge will remove chlorine and chemicals (volatile organic compounds).  Great pre and post filter for Reverse Osmosis units

  • Fits standard 10″ housings only
  • Removes sand, silt, dirt and rust particles
  • This membrane will work with the following RO models sold by Enting:
    • MT3-123 (or 103, 113, 143)
    • MT3-123C (or 103, 113, 143)
    • MT3-143
    • MT4-143C
    • MT5-123C (or 143, 193) – USES 2 CARTRIDGES

Frequently Bought Together

5-Micron Standard Sediment Prefilter Cartridge (10")

This MADE IN THE USA 5-micron wound polypropylene filter cartridge is commonly used as an RO Pre-Filter Cartridge

  • Can also be used for other absolute or depth filtration applications
  • Removes sand, silt, dirt and rust particles
  • Fits standard 10" housings only
  • This membrane will work with the following RO models sold by Enting:
    • MT3-123 (or 103, 113, 143)
    • MT4-143C
    • MT5-123C (or 143, 193)
  • For drinking water applications, do not use where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit.
      • This cartridge will not remove chemicals or disinfect water.
50 GPD TFC MEMBRANE FULL VIEW

50 GPD Reverse Osmosis TFC Membrane

RO Membranes typically last 4-5 years if installed on a soft water line.  They do not need to be replaced every year.

  • 50 Gallon Per Day (GPD) Reverse Osmosis TFC Membrane
  • Will fit any standard membrane housing
    • WILL NOT FIT MICROLINE, CULLIGAN OR ANY OTHER PROPRIETARY RO SYSTEM
  • This membrane will work with the following RO models sold by Enting:
    • MT3-123 (or 103, 113, 143)
    • MT3-123C (or 103, 113, 143)
    • MT3-143
    • MT3-143C
    • MT5-123C (or 143, 193)

Related products